The Importance of Water Mitigation After Flooding

How Mitigation Can Help You After a Home Flood

For individuals who have actually suffered flooding in their home, condo or flat, getting it back to typical quickly is necessary to protect home. Water that is left for any length of time can trigger considerable damage to building materials in addition to personal home.

While broken pipelines, burst hot water heating units, and other flooding events may appear to be an easy clean-up, the reality is that water damage from flooding ought to not be taken gently. Water that reaches flooding levels in a home can cause sheetrock to collapse, damage electrical wiring, ruin carpeting, buckle flooring, warp wood flooring, and wall joists and trigger mold growth.

Damage from Water that Sits

If flood water has just been partly eliminated after a few days, the concern over long lasting damage is significant. Water that is left in the home for a couple of days can start to bring hazardous microbial residential or commercial properties that can be a health risk. The longer the water sits, the more damage to the building materials, sub-flooring, and structural joists take place. That is why immediate water mitigation is suggested.

Even after the flooded area of the structure has been dried, danger from the flooding occasion stays. As soon as the water is gotten rid of, a complete drying out process needs to strike avoid any further damage. When the full drying procedure has actually been carried out, a total assessment of the structure and building products need to be started to check the level of damage to the structure, building, and wiring products.

Fortunately is there has been a considerable improvement in water mitigation innovation. Today through innovative water elimination and drying methods, victims of water damage can get their lives and residential or commercial property back to normal rapidly. If the water is gotten rid of within the very first 24- 36 hours, the opportunity for mold growth is much lower. If it is enabled to remain beyond 48-60 hours, water that is quickly removed will make sure the damage to the home will be less substantial than.

The Dangers of Mold

While the elimination of water is crucial in protecting the structure products, electrical wiring, and structure of a home, the drying out of the total structure is important in the avoidance of mold growth. Mold growth can happen rapidly and spread onto numerous different kinds of building products along with personal effects. Mold is a health risk and can pose considerable risks to occupants that are exposed to it.

If mold is enabled to spread, it can make the residential or commercial property uninhabitable without a total mold remediation process. In some cases, if the mold has spread out significantly, it can trigger so much damage to the home that it can not be restored.

Water Damage Insurance Claims

If the flooding in your house or flat is triggered by damaged pipes, burst hot water heater, or other non-weather associated flood damage, your home insurance coverage or occupants insurance should cover the cost of water mitigation. The liability for clean-up and repair work will fall upon the municipality or professional’s insurance coverage policy if a water main break or construction causes the flooding.

When utilizing a professional water damage removal company, they recognize with the process of filing all the necessary documentation for property owners and tenants that have insurance coverage policies for these types of claims. This enables fast processing of the claim and much less stress on the water damage victim.

The Importance of Water Mitigation After Flooding was originally published to @a1rminnesota

https://minnesota.action1restoration.net/water-damage/restoration-plymouth/the-importance-of-water-mitigation-after-flooding/

Reasons You May Need to Hire a Flood Damage Company

Safety is the primary objective when it pertains to discovering all the right reasons to hire a water damage company. With water damage comes the possibility of very harmful conditions manifesting due to several elements. Even if you can not see the full capacity of the damage that surrounds you and the locations affected, the damaged locations can spread their concerns even more out even without your understanding. Pumping water out of the facilities is just half of the fight. The majority of the fight for safeguarding your damaged residential or commercial property depends on handling the aftermath in a timely fashion.

What exactly does a water damage business do?

Water damage business operate in the elimination of water and other liquid contamination types within a home, company, or alternatives of flooded residential or commercial properties. These kinds of damage companies then work to restore damaged areas in a detailed manner. This needs a keen eye and efficiency in figuring out which locations are most damaged and in what methods. Those who work for these companies are extremely trained to understand what treatments are best for what any damaged locations. It is important to select just reputable business to restore your home and company properties.

Different kinds of water will work its method into your house. Depending upon the type of water that pollutes your home, there will be different actions to take. It also depends on what rooms you are working with, not to mention what is within the rooms. Depending upon what infects the waters, there will be a distinction in the sort of water pollutants. Classification one water types are thought about benign and is the cleanest type. The water that comes right out of your pipelines in its fresher type fits this classification and is likely the easiest to deal with. Category 2 water is called “grey water” and tends to come from places like dishwashing machines and clothing washers. This may consist of microorganisms that are thought about pollutants. “Black water” is chock loaded with unsafe pollutants and is among the most harmful to work with.

The Visible Causes of Water Damage

In order to avoid water damage, you should initially learn what causes it. Be sure to look for the 2nd part of this short article and find out all about the invisible causes of water damage.

Water:

Rain water will build up along the structures or beneath the flooring throughout rainy seasons unless directed away by correct drainage. It is really hard to manage damage brought on by rain water but it is possible to decrease its impacts

Seamless gutter & Drain:

Clogged up seamless gutters will push rainwater under shingles, or will cause water to travel down the walls internally. An absence of drains can cause an overflow. Rain gutters need to empty far enough far from structure walls otherwise water will build up, leading to damage and a wet basement and even to structure problems.

Windows and Doors:

Unprofessionally installed windows and doors will enable water to penetrate into the wall. Damaged seals around doors or windows can trigger windblown wetness penetration. Examine your doors and windows thoroughly especially throughout damp seasons.

Leaking Roofs:

Old roofing materials can expose the roof deck to water intrusion and damage particularly around chimneys and exhaust fans. Flat roof drains pipes can hold and clog water on the roof, increasing the dangers of a leak and a possible collapse of the entire roof under the weight of the water.

Attics:

Incorrect attic insulation and ventilation permits heat to get away, turning roof snow into an ice-dam. Ice dams will force moisture under roof shingles where it can drip into the attic or walls.

If you are experiencing water in any one of these categories, a quality water damage company will know precisely which it is and what to do with it. Working with specialists who have actually been dealing with water damage of all kinds for lots of years will take out the guesswork for you. Other irreversible water damage, such as warping of wood and other materials, is really likely to occur.

The sooner that a trustworthy water damage business is put on the case, the better. Work with a water damage company right off the bat and leave it up to the professionals to handle right the very first time around.

Reasons You May Need to Hire a Flood Damage Company Find more on: Action 1 Restoration of Minnesota Water & Fire Damage

https://minnesota.action1restoration.net/water-damage/restoration-plymouth/reasons-you-may-need-to-hire-a-flood-company/

Important Considerations You Should Know About

What You Need to Know About Water Damage Disasters

When facing water damage, you must take instant action. Action 1 Restoration reacts quickly. We use advanced methods and equipment to get rid of the unwanted water quick. To make sure that your house is completely and properly dried, they monitor and correctly record the entire process.

Water Damage Effects

Those who have experienced it know that water damage is something severe. The risk of water damage rises when snow melts rapidly or when it greatly rains. Water damage can be quite pricey to address. You may need to spend a lot of money for the repair and replacement of damaged electronics, wood furnishings, upholstery, pipes equipment, and household home appliances.

Mold growth also typically accompanies water damage. They likewise have the appropriate abilities and equipment to perform efficient water damage clean-up.

Water Damage Causes

Different elements can set off water damage in your home or commercial home. These consist of blocked toilets, dripping dishwashers, broken dishwasher hose pipes, overflowing washing devices, broken pipelines, pipes leaks, leaky roofs, and cracks in your house’s foundation.

Heavy snow or rains, and floods can also trigger water damage. These can likewise result to water accumulation in your basement. While water in the basement can be thought about a minor problem, it can cause major problems like the destruction of your home or business.

Water damage clean-up need to begin right away– as soon as your property sustains water damage. In this manner, you increase the chances of saving your water-soaked carpets, carpets, furniture, clothing, and other comparable products.

Water Damage Categories

To ensure that water elimination and water damage repair is done properly, you first need to examine the extent of the damage. This way, you will know what you require before you start the clean-up procedure. Water damage can be categorized into a number of classifications:

  • Category 1– This implies the floodwater is tidy. There are no health risks to individuals. Classification 1 water damage is typically due to sink overspills or damaged home appliances.
  • Category 2– This is also known as gray water. There is water contamination that may cause health problems if ingested. The water contains microbes. Reasons for classification 2 water damage consist of broken sump pumps, seepage, and broken toilets.
  • Category 3– Also called black water, classification 3 water is unsanitary. It features germs and other disease-causing organisms. Black water damage is typically brought on by standing water contamination and sewage problems.

Water damage has a number of classes.

Knowing the damage category is essential when figuring out the appropriate repair work alternative.

  • Class 1 has the least amount of threat as just a small quantity of water is involved in this water damage type. Clearly, repair alternatives are likewise the simplest.
  • Class 2 water vaporizes quickly. The affected carpets, cushions, pillows, and carpets may sustain some damages. Repair is a bit harder than class 1 damage.
  • Class 3 water evaporation rate is the fastest. The water frequently originates from damaged sprinklers and other similar overhead sources. Water might soak furnishings and walls.
  • Class 4 water damage needs the application of unique water elimination and restoration treatments. It affects hardwood floors, concrete, along with plaster.

Repair Process

Selecting the procedure of water damage restoration to carry out is really essential. Otherwise, the incorrect option may lead to severe damage to your home.
The amount of damage-causing water and the extent of the damage affect the success rate of any water damage repair procedure. Experienced water repair business like Action 1 Restoration have the necessary equipment and strategies to reduce the harmful impacts of water.

In some cases, outdoors professionals might be asked to evaluate the affected residential or commercial property, and create a solid water elimination and remediation plan. Water remediation companies employ well-documented treatments and cutting-edge devices for water damage control. While water clean-up in basements includes just a short procedure, other impacted locations might require more substantial remediation.

Health Risks

Wetness helps mold and other hazardous organisms thrive. It increases the danger for more serious health issues. Exposure to mold might intensify the conditions of people with allergies and asthma; in specific, kids and those with a jeopardized body immune system. Direct exposure to damaging microorganisms might also activate breathing conditions.

In cases of water damage, instant clean-up is required. When in need of water damage clean-up, schedule a visit with Action 1 Restoration right away.

Important Considerations You Should Know About was originally published on A1RMN – Action1RestorationMinnesota

https://minnesota.action1restoration.net/water-damage/restoration-plymouth/important-considerations-you-should-know-about/

Hidden Causes of Water Damage, Who You Need to Hire

Why You May Need to Hire a Plumber and Water Damage Company

You should first find out where to look for and what are the different causes of this kind of damage if you want to avoid water damage in your home or office. This post covers the unnoticeable reasons for water damage, those that are a little more difficult to find by simple do-it-yourself inspections. There is extra product about the visible causes of water damage that you require to read in order to totally understand the topic. A great understanding of the subject will not just provide you with great strategies to prevent water damage but likewise will help you conserve loan and will keep your home in good shape, protecting its value for several years. While you can manage some of the causes for damage, others can not be forecasted and therefore can not be prevented.

Pipe Leak Repair:
Plumbing equipment generally develops leakages due failures in joints or tube accessory.
Internal wall leaks are even harder to discover and can trigger significant damage.

Pipes Replacement:
The common issues in pipes are obstructed toilets and drains (specifically kitchen drains), failure of garbage disposals, and roots in drain lines.

Weather:
Unforeseeable summer season storms, floods, and other water accompanied catastrophes such as typhoons, blizzards, and tornado’s are some more reasons for water damage.

Heating Systems and Air Conditions:
Disregarding air conditioning system causes poor performance, pricey operating costs and wetness issues. Wet cooling ducts promote mold and other water-borne germs.

Devices:
Water washers, dryers, and heating units tend to crack with time, permitting water to drip. These appliances will begin leaking gradually, this leakage can cause a flood and grow when totally failed. Hoses tend to weaken inside out, resulting in leakages.

Basements:
A damp basement is brought on by moisture build-ups that drip through the structures. It increases humidity even if there are no leaks or standing water when wetness evaporates. Another typical cause is condensation on the cold concrete walls and floorings throughout more damp time durations.

It is advised to inspect your home regularly to guarantee that it remains in excellent condition and keeps its genuine market worth. A routine inspection will also help preventing high-costs repair projects after water associated disasters.

Discover A Plumber To Effectively Fix Your Problems

Good plumbing upkeep is reasonably simple, however stopping working to keep up with it can indicate expensive repairs. Here are some great ways you can look after your pipes, either yourself or with the help of a licensed expert. Take care of your home now and it will benefit you in the future.

If your water is coming out black, then probably you have an iron and magnesium concern to your water. You need to get in touch with a water conditioner business, and get them to come out and assess your water. They will have the ability to repair the problem by adding a water conditioner.

Coat your sinks with broadening foam to deaden noises. Sounds will resonate strongly in between them and create vibrations if you have to sinks side by side. This is bad for the pipes. The broadening foam will decrease the vibrations and safeguard your pipelines. You may find it much easier to use foam before you install the sink.

Examine to make sure that the walls behind the tiles in your restroom are not soft. Press into the tiles to validate that the foundation is robust and firm. If the area is fragile and fragile, there is a great opportunity that water has produced damage behind the tiles with time.

Set the temperature level on your hot water heating system to a temperature level that does not exceed 120 degrees. This helps to conserve energy and prevents the water from ending up being potentially scalding and too hot somebody in your household. Older designs that do not have a temperature level setting must be set on Medium.

If attempting a pipes repair yourself, make sure and have a lot of pails on hand to catch spilling water. While you might have shut off the water supply, there is always some water left in the pipelines and the larger the house and more comprehensive the pipes system, the more water you may experience.

Inspect the filters in your heating system, frequently. If these filters have not been cleaned up or changed recently, they may become blocked. This will impact how well your furnace is able to work, indicating that you might not have sufficient heat throughout the winter season. Take this easy action, as soon as the weather condition begins to become cold.

Plumbing must just be done by experts if there is a major problem or if you do not understand pipes. A lot of the big issues that plumbers handle, really have easy options. The average person, who does not understand the intricacies of pipes, typically end up intensifying the issue by causing other pricey damage to your house during the stopped working repair work. The plumbing will need to be called in the end, anyhow.

Do you have a sump pump in your home? You must examine it each spring to ensure that it is operating properly. Pour a couple of buckets of water into the sump pit. When you so this, the pump ought to switch on rapidly, discharge the water, and after that shut down without any problems.

As mentioned above, a lot of regular pipes upkeep is simple and easy. A lot of repairs resulting from serious damage to your plumbing are not. Now that you understand how to deal with the plumbing problems in your house, you ought to be more ready to avoid or reduce the more serious problems that can result.

Prevention is the First Defense for Water Damage

If you want to avoid water damage in your home or office, you should initially discover where to look for and what are the various causes of this kind of damage. There is extra material about the noticeable causes of water damage that you need to check out in order to completely comprehend the topic. Water dryers, heating units, and washers tend to split over time, enabling water to trickle. If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to call a water softener company, and get them to come out and evaluate your water.

Hidden Causes of Water Damage, Who You Need to Hire was first seen on Industry Authorities A1RMN

https://minnesota.action1restoration.net/water-damage/restoration-plymouth/hidden-causes-secondary-damage-who-you-should-hire/

Everything You Need to Know About Floods

Floodwater can do a great deal of damage to your home’s structure. It can also ruin your personal belongings, and pose health dangers to members of your family. Floodwater features a great deal of mud and impurities. Even simply an inch of water can currently cost you a great deal of cash in terms of damaged appliances, carpets, wallboards, and furniture. A much deeper flood or a more severe storm can cost a lot more.

Flood Clean Up

  • Tidying up after a flood can be a long and tiresome process. Following are some tips to keep in mind after a flood:
  • Insurance– If your policy consists of flood damage coverage, an adjuster will contact you. Take videos or images of the damage as you clean up. Your insurance coverage claim, earnings tax reductions, and disaster assistance application need a complete documentation.
  • Clean mud from hard surfaces using a garden hose pipe or sprayer. Tidy and disinfect all surfaces.
  • Cooking area tidy up — Prepare a disinfecting solution made up of 2 Tbsp. of chlorine bleach for each gallon of warm water. To dry the dishes, don’t utilize a towel. Air dry them instead.
  • Boil metal utensils, flatware, pots, and pans for about 10 minutes to sanitize them. Do not use chlorine bleach as it reacts to metals, and triggers darkening.
  • Use a chlorine bleach for counters and cabinets, but make sure to rinse them well before keeping the dishes.
  • Cleaning furnishings and other household products — Take your carpets, furnishings, clothing, and bedding outdoors right away to enable them to dry.
  • Utilize a dehumidifier or air conditioning unit to get rid of wetness in your house, or you can just open your windows for ventilation. Allow the air to circulate using electrical fans.

If some products already have mold and mildew, take them outdoors and brush them. This method, spores will not scatter in the home.

  • Vacuum the walls, ceilings, and floor to get rid of mildew. Wash with disinfectant. Wear a protective mask as you clean to avoid breathing in mold spores.
  • Discard flooded and infected mattresses, pillows, and stuffed animals. Cleaning upholstered furniture is best done by experts like Action 1 Remediation. When damaged significantly, Furniture made of solid wood are often restorable unless.
  • Ceilings and walls– When wet, a wallboard becomes sponge-like. Thus. You need to eliminate the afflicted wallboard, paneling, and plaster at flood level. They can present serious health risks if these are not removed.
  • Electrical system– Shut off your electrical system as soon as flooding starts. Make sure it is inspected and repaired by an electrician before you turn it back on. Your benefit outlets, switches, junction boxes and entryway panel may have been submerged in water and filled with mud.
  • Heating & cooling systems– These will require evaluation and proper cleansing. You need to change flood-soaked insulation.
  • Devices– When flooded, you appliances will get odors, slit deposits, stains, and other gritty dirt. Do not attempt to use electrical home appliances before they are cleaned as this can cause electric shock to you and serious damage to the home appliances.
  • Basement– Whether your basement is almost complete or full of floodwater, you must pump out only up to 2 or 3 ft. of water daily. Draining the basement quickly might cause to the walls’ outdoors pressure to exceed the pressure inside. This might cause the floor and walls to crack or collapse. To be sure, have the flood clean-up done by a pro who has experience in dealing with mud flood.
  • Floors– If you have wood sub-flooring, you need to first remove the floor covering like linoleum, carpet, or vinyl. This will allow the sub-flooring to thoroughly dry up. This may take a couple of months. Expose the boards to air.
  • Carpeting– Flooded rugs and carpets need to be cleaned as soon as possible. If affected by sewage-contaminated water, discard them right now for health safety reasons. Do the same to your carpets if they were immersed for at least 24 hours. Drape your rugs and carpets outdoors to tidy. Apply disinfecting carpet cleaner on the dirty spots using a broom.

Flooding in your home is a severe matter that you ought to not ignore. It does not only cause serious damage to your home’s structure. Flood water is often infected and positions excellent health risks for you and your household.

When cleaning up after a flood, it is best to contact Action 1 Restoration right away. By doing this, immediate evaluation on the severity and extent of the damage can be done. The required repairs and remedies can also start quickly.

Everything You Need to Know About Floods See more on: Action 1 Restoration of Minnesota (A1RMN)

https://minnesota.action1restoration.net/water-damage/restoration-plymouth/everything-you-need-to-know-about-floods/

What is a Sump Pump and How Does it Work?

If You Have a Basement, You Should Have a Sump Pump

If you have a flooded basement, it’s important to act fast so you can remedy the situation as quickly as possible. However, once the water has dried, you should also think about how you can work to prevent this from happening again in the future. At Action 1 Restoration, we recommend homeowners have a sump pump installed as a preventative solution for basement flooding. Since most homeowners who have basements are likely to deal with flooding at some point, this is an important tool in mitigating water damage and avoiding a disaster.

What is a Sump Pump?

Sump pumps are submersible pumps that are installed inside of sump pits at the lowest part of a basement. They work quickly to remove water that can be common in basements, whether from leaking or flooding. By draining and directing the water to an area away from your home’s foundation, this ensures water damage can be prevented and your basement can stay dry no matter what’s going on with the weather, or your plumbing.

Although common in new construction homes, especially in areas that are at an increased risk of flooding, sump pumps aren’t always found in older homes with basements. However, this has changed in recent years as homeowners have become more proactive in preventative maintenance. More sump pumps are now being installed in older homes in order to prevent the stress and damage that a flooded basement can create.

what is a sump pump and how it works

How Does a Sump Pump Work?

To better understand what you can expect from one of these machines, it’s important to learn a few details about the mechanics of how they work. Sump pumps are generally placed inside of sump pits. These are holes with gravel bases that are situated in the lowest part of the basement. Connected to this machine is a pipe that extends outside of the home so that water can be drained away from the foundation of the home. This same pipe is equipped with a check valve that prevents any outside water from coming back inside and filling the pit back up.

Once the pressure sensor inside of the machine detects water, the pump will turn on and begin taking water out of the pit. However, some sump pumps are not automatic and must be manually operated by the homeowner. There are also two different types of sump pump designs, including a submersible pump, which has a waterproof encasing so it can stay inside the sump pit at the bottom. The other is a pedestal sump pump, which will sit at the top of a sump pit to avoid getting wet.

What to Look for in a Sump Pump

If you plan on purchasing one of these machines for your home, you’ll quickly find that there are many options. One of the best ways to narrow down your choices is by taking the time to learn more about the equipment and features that each has to offer. The details below are some you’ll want to keep in mind and compare for each unit.

  • A voltage of 110 is adequate if you’re using the machine within an average home. Warehouses or large buildings should have sump pumps with a voltage of 220+.
  • A machine with automatic controls is preferable, as this is more convenient than a manual sump pump.
  • If you’re only dealing with water inside of an average home, then horsepower at one-quarter to one-third should be adequate.
  • Head pressure will determine the height that the pump can raise water, with most being around 12-feet in length.
  • A backup system is recommended if you’d like your sump pump to continue to work even after the power has gone out.

What Happens When it Floods?

With a sump pump properly installed, you will have a very low chance of experiencing flooding in your basement. Since it’s estimated that over 90% of basements will be impacted by moisture at some point, this means you may be able avoid water damage many times. This can give you peace of mind in your home, especially if you live in an area that’s prone to flooding. While it’s beneficial to avoid damage because of the hassle, this also means avoiding costly water damage repairs that would otherwise be necessary.

What if Flooding Has Already Happened?

If your home has already been flooded and your basement is wet, you’ll need to get started with water damage restoration as soon as possible. Our team at Action 1 Restoration strongly recommends hiring a professional if you don’t have experience with this on your own. There is a lot of different commercial grade equipment that is used during the entire process. This will ensure your home and basement are properly dried and can be recovered without the risk of mold and mildew growth. Once finished, you can work with a contractor to have your choice of sump pump installed and working right away.

 

What is a Sump Pump and How Does it Work? was originally seen on home page A1R

https://www.action1restoration.net/water/water-damage/what-is-a-sump-pump/

Water Damaged Subfloor: How to Dry Out and Replace

When a house is built, the structure begins with many base layers that set the foundation for a strong and lasting home. This includes the subflooring, which is a thick and durable material that can be found underneath the tile, wood, or carpeting inside of your home. This layer generally rests on the joists of the home to create a strong base for any flooring you choose to have installed.

In general, most homeowners will never see this base unless they change out their flooring. However, in situations where water damage is present, subflooring can play a key role in the cleanup process. If you’re in a situation where your home has water damage and your flooring has been impacted, the information below can help. At Action 1 Restoration, we share this information because we prioritize helping homeowners understand more about their homes and how water damage can impact each area.

How to Dry Out the Subfloor Effectively

If a flood or leak has occurred inside of your home, it’s almost guaranteed that the flooring will be impacted. Unfortunately, this will not safely dry out on its own. In fact, leaving flooring to dry naturally can make the damage worse while also giving mold and mildew a chance to grow. To have the best chance of preserving your home, proper drying is crucial. To do so, our company at Action 1 Restoration recommends first stopping the source of water. After this, it’s important to remove excess standing water with a wet/dry vacuum and/or large buckets.

The next step in drying out a water damaged subfloor is to remove the flooring from the top of it. This can be done on your own with a few tools, although some homeowners prefer to contact professionals to avoid causing more damage. If you’re not comfortable with this type of work, we highly recommend asking for help from the start. Once all impacted flooring has been removed, you’ll want to dispose of it outside to prevent the moisture from staying indoors.

Once the flooring is removed, the real drying of the subfloor can begin. This should start with placing thick plastic sheeting over the flooded area and securing it down with tape on the sides. It’s important to make sure tape is covering each seam so the plastic is completely sealed. From here, take a utility heater and place the spout of it underneath a small portion of the plastic. Seal the edges and then turn on the heater. At this point, the plastic should inflate and fill with air as the heater runs.

In most homes, the heater will need to run for three or more days to completely dry the subflooring. However, we recommend checking daily to see how the subfloor is progressing. If you’re not able to tell by touch, then a moisture meter is an inexpensive tool worth investing in. This will tell you how much moisture is left so you know when it’s completely dry and safe to begin working on. When the drying process is finished, the plastic can be removed and disposed of so you can move on with the rest of the restoration.

Types of Subflooring

There are four main types of subflooring materials that are used in the construction of most homes. These include:

  • Plywood: This is the most common type of subflooring and it is very likely what you’ll find in your home. It’s made up of many sheets of wood veneer that are bonded together with high heat and pressure. It’s strong, easy to work with, and easy to install.
  • Concrete: Concrete slabs are not as common but can be found in homes throughout the country. While it may not seem like this material can be affected by moisture, it can still take a long time to fully dry.
  • High-Performance Panels: High-performance panels are specially designed to resist moisture absorption so that they do not swell or warp. These are becoming more common but are unlikely to be in older homes unless there has been significant work done to improve the flooring.
  • Oriental Strand Board: This material is made of strands of plywood that are pressed together in a crossing pattern. This helps reduce water absorption by increasing density, which is why it has become more common in homes built today.

How to Remove Subflooring

In most homes, the subfloor is made of plywood that’s 3/4″ or 5/8″ thick. When it’s exposed to water and not dried out promptly, it will swell and can eventually rot or experience mold growth. Moisture can also cause problems with the structural integrity of the subflooring and eventually lead to safety issues within the home. This is why, in some situations, it’s crucial to remove the subflooring so it can be replaced.

To start the removal process, Action 1 Restoration recommends having the following tools:

  • Screwdriver
  • Pry Bar
  • Circular Saw
  • Clawhammer
  • Diagonal Pliers
  • Drill
  • Jigsaw

If you don’t already have these tools or aren’t comfortable using them, then you may want to hire a professional to help you. Most contractors can remove subflooring in much less time than it would take an inexperienced homeowner. Either way, it’s important to make sure the job is done right so that all of the impacted subflooring is completely removed. Missing even a small portion could result in hidden mold growth or an unstable flooring area.

Once you’re ready to get started, you’ll need to determine the best removal method for the type of subflooring you have. If it’s made of wood, you’ll want to use a circular saw to carefully cut through the area that has been impacted. Keep in mind, you don’t want to cut deeper than the wood, so go slowly and be gentle with the amount of pressure you put on the saw. Once finished cutting the perimeter, use a pry bar and hammer to lift small sections. Since these will likely be hammered in at the joists, you’ll also need to pull up nails to get the sections out completely.

Tip: If you only have concrete subflooring, then it’s likely you won’t need to remove it after a flood. However, thorough drying will be necessary to prevent mold growth and ensure new flooring can be safely installed.

How to Replace Subflooring

Once the ruined subflooring is out, it will be time to install the new material to make the base complete again. To do this, new subflooring materials should be purchased right away. If you must replace all of the materials, then you may want to consider upgrading to high performance panels or oriental strand board for better protection from water damage in the future. Once you have the material, you’ll need to measure and cut panels to place back into the areas that were removed. This may also require fastening them to joists to further secure their placement.

After the subflooring has been completely replaced with new materials, you’ll be able to install new flooring on top. This is another project you may not feel confident doing on your own, especially if you don’t already have the tools required. Fortunately, you can hire a contractor to do both the flooring and subflooring for you. Their assistance can give you peace of mind, knowing the work was done the right way.

Restoring Your Home After Water Damage

When dealing with water damage in your home, it’s always important to address the subflooring. If this is something you’re not able to do on your own, then don’t hesitate to call professionals such as ours at Action 1 Restoration. We can help you recover, replace, and restore your subflooring and flooring so your home is put back together and comes out looking like new again.

 

The article Water Damaged Subfloor: How to Dry Out and Replace was originally published to Action 1 Restoration Water & Fire Damage

https://www.action1restoration.net/water/water-damage/damaged-subfloor-how-to-dry-out-and-replace/

Dangers of Standing Water and What to Do

It’s estimated that roughly one out of every 50 will have a water damage claim each year. While some of these homes will clean up quickly, others will deal with subsequent issues such as stagnant water. At Action 1 Restoration, it’s important for us to teach homeowners more about what this can mean for their homes. With this understanding, you can be empowered to take care of water damage the right way and avoid the dangers that can be associated with stagnant water.

What You Need to Know About Stagnant Water?

Also known as standing water, this is water that sits in place without having any area to drain to in a timely manner. In homes that are flooded, stagnant water can be found just about anywhere, from the top of the ceiling to the floors and basement. Since standing water can come from many different sources, including rain or an indoor water supply line, it’s important not to assume it’s safe.

When any type of water sits for long periods of time, whether it comes from the sewer or a clean source, it can quickly breed bacteria that is dangerous. While this can worsen water damage by the hour, it can also increase the risk of mold and mildew growth. What’s even worse is that mosquitoes and other pests are naturally attracted to standing water, which can mean an unexpected infestation quickly developing in your home. There are many reasons that can cause an excess of water in the walls and on the floors of your home.

What are the Dangers of Stagnant Water

  • Standing sewer water can expose your family to bacteria and parasites that negatively impact your health
  • Clean standing water can attract pests and insects that carry diseases
  • All standing water can result in mold growth within 24-48 hours
  • Standing water can continue to cause damage to floors, walls, ceiling, and furniture as it’s left to soak into all nearby materials

There are many health risks associated with stagnant water, which is why our team at Action 1 Restoration urges homeowners to handle this situation immediately. When water sits for long periods of time, it will become increasingly hazardous. This can be dangerous for every member of your family, including pets and children. Even if the water came from a clean source, it’s crucial to act quickly.

How to Remove Stagnant Water

We understand that once you know the dangers of stagnant water, you can feel an urgency to get rid of it as soon as possible. Fortunately, there are many ways to get started. Our team at Action 1 Restoration has shared some of our top tips below to help you tackle standing water quickly and with the best results possible.

Get the Water Out

After you’ve found and eliminated the source of water, it’s important to begin hauling the water outside. This can be done in many ways, depending on how much water you have. In most situations, buckets, towels, and a wet/dry vacuum are excellent tools to have in your arsenal.

Tip: If you’re dealing with water coming from the sewer or any other contaminated sources, we recommend contacting a professional. This will ensure the right steps are taken to keep your family and home safe. Working with contaminated water on your own can put you at risk of illness.

Dry It Quickly

It’s important to dry out the space as quickly as possible once the excess standing water has been removed. This will help prevent the growth of mold and it can minimize the risk of an insect infestation. To do this, you should start by bringing in a couple of industrial fans to the room and pointing them toward the areas that have the most moisture. Use as many fans as is possible to speed up the drying process.

A dehumidifier is another essential tool for drying out a room that has been impacted by water damage. This will draw moisture out of the air so the space dries more quickly than it would with fans alone. If you are dealing with a large area, you may need an industrial machine to get this done.

Tip: Do a full inspection of your home to make sure you’ve found all areas that have standing water in them. This should include the attic, the basement, and any rooms that may have been impacted by the flood. By being thorough, you’ll avoid missing areas that are damaged and may be potentially hazardous due to excess water.

Get Damaged Materials Out

Once the room is dry to the touch, it’s important to remove the materials that are damaged and beyond saving. This includes insulation, which can easily hold water for long periods of time and be difficult to dry completely. By getting these materials out, you’ll have confidence that all moisture has been eliminated and there is no more standing water within your space.

Restoring Your Home After a Flood

Although getting the stagnant water out of your home is a huge accomplishment, this is not the last step in recovering from water damage. After thoroughly drying and removing the damaged materials, you’ll need to take care to replace what has been removed to ensure your home is structurally safe and well insulated. This is likely to require construction, especially if you had major damage that impacted the structure of your home or any wiring/pipes. When this is the case, always hire a contractor to help you.

Important Facts About Stagnant Water

  • Excess water can be dangerous for small children and pets, which is why it’s recommended to vacate them from the house before you get started working.
  • Mosquitoes and other insects can carry life-threatening diseases, such as malaria, dengue, and West Nile virus.
  • Once mold grows, it can cause respiratory issues for anyone who is living inside of the home. This is why we strongly recommend living elsewhere until your home is fully restored.
  • If standing water is located near electrical outlets or wiring, do not step in it. Always contact a professional to avoid the risk of electrocution or shock.
  • Stagnant water that’s the result of a broken sewer line should always be handled by a professional who is equipped with the proper cleanup equipment.

Expert Service When You Need Help

If you need help dealing with stagnant water, then our team at Action 1 Restoration recommends working with a trained team of professionals. Our restoration technicians, in particular, are trained to deal with all types of flooding and varying degrees of standing water damage. They will help make sure you are safe, and your home is recovered properly from start to finish.

 

Dangers of Standing Water and What to Do See more on: http://www.action1restoration.net

https://www.action1restoration.net/water/water-damage/stagnant-water-dangers/

How to Thaw Frozen Pipes: Burst Pipe Prevention Steps

If Your Pipes Are Frozen, Follow These Steps to Thaw Them Out

It’s estimated that over 250,000 homes will experience water damage from frozen and burst pipes each year. These contribute to the nearly 2.5 billion dollars that the insurance industry pays out yearly on water damage and mold costs. With so much time and money spent surrounding this issue, many homeowners wonder what they can do to prevent this from happening in their own homes. Fortunately, there are many things you can do to care for and properly thaw your pipes in order to minimize the risk of them bursting.

Even if you’ve gone through many winters without any issues with your pipes, this doesn’t mean you’ll be problem-free this year. You never know when a problem can occur, and for many homeowners, this means a surprise flood when they least expect it. At Action 1 Restoration, we want to help homeowners minimize their home’s risk of flooding. We encourage you to read the information below to learn how to prevent burst pipes, thaw frozen pipes, and restore your home if water damage does occur.

Behind the Scenes: How Pipes Freeze and Burst

In most homes, water can run freely through pipes as long as the weather does not reach below 20 degrees. Unfortunately, in climates where the weather reaches below freezing, this can result in the water inside pipes freezing overnight when residents aren’t using their plumbing. This is especially true for pipes that are located in areas of the home that are not heated or fully insulated, including the garage and unfinished basements.

Once pipes are frozen, the water inside will naturally expand. Unfortunately, this often causes the pipes to burst, as they aren’t able to handle the change in pressure. This can result in flooding, which will worsen as the pipes begin to warm up and thaw during the day. In situations where the pipes don’t completely freeze, residents may find that their water is slow to move through the pipes. This is the result of ice pieces inside of the pipes that can be slow to melt.

Risk Factors for Frozen Pipes

It’s important to recognize the signs of your home being at a greater risk of frozen pipes. By doing so, you may be able to prevent this from happening. Some red flags to look for in your home include:

  • You live in a very cold climate with temperatures that reach below freezing.
  • You live in an older home that doesn’t have pipes that are well insulated.
  • You live in a cold area and several areas of your home are unheated.
  • You have outdoor pipes and live in an area that reaches freezing temperatures.
  • You have seen chunks of ice in your water when it’s especially cold outside.

If any of the above are familiar, then it’s important to be proactive in the care of your home. Fortunately, knowing that your property is at an increased water damage risk of frozen and burst pipes puts you in a better position to avoid potential future damage. The key lies in knowing which preventative measures to take. Some solutions our company recommends can be found below.

Tips for Preventing Frozen Pipes

Keep Your Home Warm

Although many people turn down the thermostat at night, this can be detrimental to the pipes in an older home. Instead, it’s recommended to keep your thermostat the same both day and night. This will help keep pipes warm, even when it’s extremely cold outside.

Keep Cold Air Out

If you have a garage, then it’s important to keep the door closed to prevent the cold outside air from coming in. If you must open it, make sure it’s not left open for more than a few minutes before you close it again. Since this room is generally not insulated, keeping the cold air out can help keep pipes from freezing.

Let Your Faucet Drip

Turn on one of the faucets that’s connected to an exposed outdoor pipe. Allowing it to drip even just a little bit will help minimize the risk of freezing when temperatures are low.

Open Your Cabinets

Open up the cabinets inside of your kitchen and bathrooms. This will give the pipes a better chance of staying warm so that they don’t freeze.

Don’t Turn off the Heat

If you plan on leaving for a vacation or the holidays, don’t turn the heat off. Instead, leave your thermostat set at around 60 degrees. Although this may mean your energy bills won’t be as low, it’s worth it to avoid the potential expenses that are associated with water damage from burst pipes.

Seal Windows

Sealing your windows with plastic will help keep the outside air from coming in through any cracks or edges. Ultimately, this can help keep your home much warmer, which can lead to warmer pipes that don’t freeze. If you don’t want to seal your windows, then it’s recommended to replace the weather stripping around them for added protection.

Add Insulation

If you’re looking for a long-term way to minimize the risk of frozen and burst pipes, then insulate your pipes before it’s cold out. This will be beneficial for the colder months but can also be useful throughout the rest of the year. That’s because insulated pipes lose less heat, which means lower energy bills and better efficiency.
To insulate your pipes, all you need to do is choose the type of foam insulation that works the best. You can install this yourself pretty easily, although many homeowners hire contractors so that they don’t have to climb ladders or crawl into small spaces.

Seal Pipes Prone to Freezing

Find the pipes that are most prone to freezing around your home. Once you’ve identified these, wrap small sections of them with heating tape. This is easy to find at most home improvement stores and works like a charm for preventing pipes from freezing when temperatures are low. It’s recommended to use automatic heating tape that will sense when it needs to be turned on. If you use manual heating tape, you will have to turn it on and off based on when you think the pipes might freeze.

Steps to Thaw Frozen Pipes

If you find that your water isn’t freely coming out of the faucet or your toilets aren’t refilling after flushing, this likely means that your pipes are frozen. When this happens, it’s important to act fast to reduce the risk of those pipes bursting and causing thousands of dollars in water damage. You’ll want to follow the steps below as soon as possible.

Step 1. Turn Off Water

Find the main water line to your home and turn it off immediately. While this won’t stop the pipes from bursting, it can help minimize water flow if they do break. This will also help prevent water from quickly rushing through pipes once the water does thaw and it’s able to flow once again.

Step 2. Open the Pipe

To relieve any pressure that may have built up, turn both the hot and cold handles on your faucet so that they are open. Doing so will also ensure the water pressure isn’t able to build up once the pipes have thawed out.

Step 3. Thaw Your Way

There are many different ways you can thaw out your frozen pipes. Choose which works best for you based on what you have available and are comfortable with using. Some of the best options for pipes that are exposed include:

  • Hot Towels: Wrap hot towels around pipes until they are thawed. This will require you to continuously rinse your towels with additional hot water, so it may be a slower option.
  • Electrical Heating Tape: This can prevent frozen pipes, but it can also help thaw pipes that have already frozen over. To use this, simply apply the tape onto the pipe and turn it on until it is thawed out. This is a great solution since you can leave it on to prevent freezing in the future.
  • Hairdryer: Grab your hairdryer and direct the hot air at the pipe, beginning with the area that’s closest to the faucet. When using this solution, exercise caution to ensure the unit doesn’t come into contact with water.

If you’re dealing with a pipe that is inside of the wall, you’re not out of luck. There are many solutions that can help speed up the thawing process. Some of the best options include:

  • Heat Lamp: Point a heating lamp at the wall where the blockage is located. Allow this to blow air until you see that the pipe has started to thaw. With this solution, use caution to keep the lamp moving and prevent it from coming in contact with water.
  • Increase the Heat: Turn your thermostat up to help make your home several degrees warmer. In many situations, this will thaw pipes without any extra work on your part.
  • Call a Plumber: If you need help with thawing enclosed pipes, contact a plumber for help. They will use their experience, training, and tools to help clear the blockage safely.

What if Your Pipe Bursts?

After turning off the main water line in your home, it’s important to get the water out as soon as possible. From there, you’ll want to dry the moisture and remove any materials that were damaged beyond repair. While this may be something you can do yourself, don’t take on the project if it’s too stressful. At Action 1 Restoration, we highly recommend calling a restoration technician if you need help. Professionals like ours can take care of the cleanup and make sure your home is restored the right way from start to finish.

 

 

The post How to Thaw Frozen Pipes: Burst Pipe Prevention Steps was originally seen on action1restoration.net – A1R website

https://www.action1restoration.net/water/water-damage/how-to-thaw-frozen-pipes/

Why Sewers Backup: Common Causes, Prevention and What to Do

What Causes a Sewer to Backup and What You Can Do?

Each year, thousands of homeowners find themselves dealing with water damage caused by a sewer backup when they least expect it. Unfortunately, because of the nature of the flooding, the cleanup for this can be particularly difficult. While it’s certainly a situation that can be taken care of by trained professionals, it’s still important for homeowners to prepare themselves for the unexpected. Below, Action 1 Restoration has shared some information that can help you understand more about dealing with and avoiding this type of disaster.

When a sewer backup happens, the wastewater that is used in your washing machine, toilet, showers, and sinks will push back into your home rather than going down the pipes as normal. Unfortunately, this means dangerous wastewater causing damage to your home when you least expect it. By understanding more about the most common causes of this type of disaster, you may be able to potentially prevent it from happening in your own home. This can pay off by making your home safer and teaching you tips for keeping your pipes healthy and running efficiently.

1. Tree Roots

Although trees are beautiful and add privacy around the outside of your home, they can become dangerous when their roots grow into your sewer lines over time. This can cause a multitude of problems, including a sewer line backup right into your home. The only way to remedy this is by calling a professional to cut the roots away and then repair the sewer lines where they were damaged.

If you have trees close to your home, have a plumber take a look at your sewer lines to see if they are in good shape. By being proactive, you may be able to catch a problem with tree roots before they begin causing real damage. Although this may mean taking trees out of your yard, it can be worth it for the safety of your pipes.

2. Sewer Line Clogs

In most homes, clogged sewer lines are the main culprits behind sewer backups. Unfortunately, these can happen easily when residents’ flush things that cannot break down in pipes or put fats, oils, and food waste into the sink on a daily basis. When combined with hair and other debris that can naturally fall into the pipes, it’s easy to see how a major clog can happen over time. The best way to prevent this is by being careful with what you put down your drains. This means never putting grease in the sink, disposing of coffee grounds in the garbage, keeping hair out of the bathtub drain, and not flushing things that won’t break down in the sewer.

At Action 1 Restoration, we recommend having a plumber clean out your pipes once per year to keep them running efficiently. As a bonus, this can also get rid of any clogs that might be present so they don’t become bigger problems down the road.

3. Broken or Clogged Pipes

Even when pipes are made of durable materials, they can deteriorate over time. This is why older homes are at a higher risk of pipes breaking down and eventually collapsing. Even a small crack can cause problems and lead to a sewer backup. The only way to minimize this risk is by having your pipes replaced if you live in an older home. While this can be a costly upgrade, it’s worth it to avoid the potential damage a sewer backup can cause.

4. City Main Issues

Your city’s main sanitary line could have a blockage that slowly pushes sewage back into homes and businesses in the area. The only silver lining to this problem is that it won’t happen quickly, which means you’ll likely have time to report the problem before it gets worse.

5. Problematic Sewer Line Setup

Downspouts and gutters should not be connected to sanitary sewer lines, as this can push too much water into the pipes and lead to a backup when bad weather arises. If this is how your home is currently set up, it’s recommended to speak with a professional about having outside water lines redirected away from your sewer line.

  • Dangers of Sewer Backup:
  • Water damage to your floors, walls, furniture, ceiling, and more
  • Exposure to dangerous bacteria, including Salmonella, Various Coli, and Helicobacter Pylori
  • Risk of electrical fire when water reaches outlets
  • Mold growth due to moisture in the structure

What to do if Disaster Strikes

By being proactive with care for your home and its sewer lines, you may be able to prevent sewer backup from happening. However, it’s important to note that this disaster can still happen even with regular care. If it does, it’s important to act fast and have the damage cleaned up by an experienced restoration professional. While you may want to try to deal with this on your own, this can put you in danger of illness and leave your home in danger of increased damaged.

At Action 1 Restoration, we understand that a sewer backup is the last thing you want to deal with as a homeowner. However, it’s crucial to act quickly as soon as you notice a problem. While a plumber may be able to help initially, any damage that occurs should be cleaned up by an experienced restoration technician. This will ensure your home is recovered and cleaned properly so it’s safe to live in once the mess is cleaned up.

 

 

The following blog post Why Sewers Backup: Common Causes, Prevention and What to Do is republished from Action 1 Restoration our promise

https://www.action1restoration.net/water/water-damage/common-causes-of-sewer-backups/